Avtech AVT583 사용자 설명서 - 페이지 8

{카테고리_이름} Avtech AVT583에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avtech AVT583 14 페이지. Speed dome camera

페이지 인쇄

AUTO PAN SETUP

Step1: In the live view, right click to show the main menu.

Select ADVANCED CONFIG  DCCS. Then, select the channel which connects this camera,

and click SETUP to enter the menu of camera parameters.

CAMERA

DETECTION

ALERT

NETWORK

DISPLAY

RECORD

DCCS

NOTIFY

MULTICASTING

EXIT

Step2: Select CRUISE MODE, and choose AUTO PAN. Then, go to CRUISE CONFIG to select

SETUP.

Step3: You'll see the setting panel on the bottom left side of the screen:

Icon

Function

Left limit

Right limit

Tilt angle

Zoom ratio

Pan speed

Step4: Right-click to return to the live view, and click the channel with this speed dome camera

connected. Then, click

and select

NOTE: To stop camera panning, click

ADVANCED CONFIG

CH1

CH2

CH3

CH4

SETUP

F.W.

1016

DEVICE

AVTXXX

CONNECTION

Description

Move the slider to where you want to set as the most left side of the surveillance

area, and click

Move the slider to where you want to set as the most right side of the

surveillance area, and click

Move the slider to the height you want.

Move the slider to confirm the zoom ratio you need for the current area.

Set the speed to pan.

on the bottom left side of the screen to show the PTZ control panel,

to start.

again to escape.

to set.