Avtech DGC1104XFT 사용자 설명서 - 페이지 3

{카테고리_이름} Avtech DGC1104XFT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avtech DGC1104XFT 7 페이지. Ir dome camera

INSTALLATION

Step1: Disassemble the camera case into three parts as illustrated in Figure 1.

Step2: Locate the base on the place you would like to install the camera; make sure the cable can be arranged

properly in the base. (Refer to Figure 2)

Step3: Drill 4 holes and screw the base to the wall (or ceiling).

Figure 2

Step4: Put together the bracket and the lens, and slightly adjust the camera lens. Make sure it faces your target

surveillance area.

NOTE: Do not install the lens opposite down. (Refer to Figure5)

Put together

Figure 4

Step 5: Screw the base tight. (Refer to Figure 6)

Step 6: Power on the camera and check the viewing angle.

Figure 6

Figure 1

Figure 3

Upside

Downside

Figure 5