Avtech KPC131 사용자 설명서 - 페이지 3
{카테고리_이름} Avtech KPC131에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avtech KPC131 4 페이지. Regular camera series
페이지 인쇄
MAJOR OPERATING CONTROL AND FUNCTIONS
Back Panel of MODEL 1
VIDEO
V.D .
D.D.
AES
AI
LEVEL
L
H
PL
12V DC
Back Panel of MODEL 2
AC24V / DC12V
VIDEO
V.D.
D.D.
AES
AI
LEVEL
AC 24V
DC 12V
L
H
PL
1. Flange Back Adjusting Ring
It is suitable for CS-mount lens. When using C-mount lens, please use the CS-C conversion ring.
2. Back Focal Lock Hexagonal Bolt
The camera is set at the standard back focal position. Fine-tuning is inevitable according to the lens types.
Adjust the lens back-focus by turning the focusing knob.
3. Auto Iris Lens Connector
Supplies power and controls signals to an Auto Iris Lens.
Connect to the auto iris lens cable with the supplied iris connector (4-pin male connector).
4. DC Drive Level adjustment V.R.
When using Direct Drive Lens, you can adjust the DC Drive Level for the bright of video output.
5. Power LED Indicator
The Power LED Indicator indicates normal status during operation.
6. Power Input Terminal
For connecting to DC12V regulated power supply.
For connecting to the regulated AC230V power supply.
For connecting to DC12V / AC24V regulated power supply.
*
: For connecting with the ground (earth) of power supply cable.
7. Video Output Connector (VIDEO OUT)
For connecting to CCTV monitor video input with coaxial cable.
8. Function Select
AES (Automatic Electronic Shutter) / AI (Auto Iris Lens) selectable:
AES – When using a manual iris lens or fixed iris lens, set this switch to AES.
AI – When using an auto iris lens, set this switch to AI.
9. V.D. / D.D. selectable
When using Auto Iris Lens, select Video Drive or Direct Drive depend on the type of lens you used.
10. Audio Output Connector (AUDIO OUT)
Connect to the AUDIO IN connector of the recording device.
AUDIO
1 1
3 3
2 2
4 4
AU TO IRI S
AUDIO
1 1
3 3
2 2
4 4
!
AC230V
VIDEO
V.D.
D.D.
AES
AI
LEVEL
L
H
PL
AC 230V
AUDIO
1 1
3 3
2
2
4 4