Avtech 4713218632821 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} Avtech 4713218632821에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avtech 4713218632821 18 페이지. H.265 5mp nvr

Type 2



Step1: Find the HDD tray and its accessories in the sales package, and place the rubber to the HDD tray as shown

below.

Step2: Get a compatible hard disk. With the PCB side facing down and the hard disk's connector facing the outside.

Then, place the hard disk in the HDD tray and insert the latches.

Step3: Remove the front cover by pulling from the left end of the cover as indicated below. You'll see eight HDD

bays.

Step4: Push the HDD tray with a hard disk installed to the end of the HDD bay to ensure the hard disk is inserted

properly.

Step5: Replace the front cover removed in Step3 back to the NVR.

Step6: Power on the NVR and wait till the initialization is completed. Check if the HDD indicator on the front panel is

flashing in red.

Then, right click the mouse to exit from the full screen mode. Click MENU → STORAGE to see if all hard

disks you inserted are detected, and click

the status shows READY. When you're prompted to clear the hard disk, choose YES.

one by one to mount them. Wait till the hard disk is mounted and

h517(p)_8516_quick_V1.0