Dell 1737 - Studio - Laptop 서비스 매뉴얼 - 페이지 32

{카테고리_이름} Dell 1737 - Studio - Laptop에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell 1737 - Studio - Laptop 48 페이지.

memory module connector

memory module

Replacing the Memory Module(s)

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface

(such as a connector on the back of the computer).

1. Align the notch in the module edge connector with the tab in the connector slot.

2. Slide the module firmly into the slot at a 45-degree angle, and press the module down until it clicks into place. If you do not feel the click, remove the

module and reinstall it.

NOTE:

If the memory module is not installed properly, the computer may not boot.

tab

NOTICE:

If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer.

3. Replace the base cover (see

4. Slide the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet.

5. Turn on the computer.

As the computer boots, it detects the additional memory and automatically updates the system configuration information.

To confirm the amount of memory installed in the computer, click Start

Back to Contents Page

securing clip (2)

notch

Replacing the Base

Cover).

® Help and Support® Dell System Information.