Dell 5000 Series 서비스 매뉴얼 - 페이지 6

{카테고리_이름} Dell 5000 Series에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell 5000 Series 40 페이지. Mobile workstation
Dell 5000 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 설정 및 사양 (29 페이지)

Dell 5000 Series 서비스 매뉴얼

Before working inside your computer

NOTE: The images in this document may differ from your computer depending on the
configuration you ordered.

Before you begin

1.
Save and close all open files and exit all open applications.
2.
Shut down your computer.
Windows 10: Click or tap Start →
Windows 8.1: On the Start screen, click or tap the power icon
Windows 7: Click or tap Start → Shut down.
NOTE: If you are using a different operating system, see the documentation of your operating
system for shut-down instructions.
3.
Disconnect your computer and all attached devices from their electrical outlets.
4.
Disconnect all cables such as telephone cables, network cables and so on, from your computer.
5.
Disconnect all attached devices and peripherals, such as keyboard, mouse, monitor, and so on, from
your computer.
6.
Remove any media card and optical disc from your computer, if applicable.
7.
After the computer is unplugged, press and hold the power button for 5 seconds to ground the
system board.

Safety instructions

Use the following safety guidelines to protect your computer from potential damage and ensure your
personal safety.
WARNING: Before working inside your computer, read the safety information that shipped with
your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
WARNING: Disconnect all power sources before opening the computer cover or panels. After you
finish working inside the computer, replace all covers, panels, and screws before connecting to
the power source.
CAUTION: To avoid damaging the computer, ensure that the work surface is flat and clean.
CAUTION: To avoid damaging the components and cards, handle them by their edges and avoid
touching pins and contacts.
6
Power → Shut down.
→ Shut down.
1