Dell d400 - Latitude - Pentium M 1.3 GHz 서비스 매뉴얼 - 페이지 16

{카테고리_이름} Dell d400 - Latitude - Pentium M 1.3 GHz에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell d400 - Latitude - Pentium M 1.3 GHz 48 페이지.

Back to Contents Page

Hard Drive

Removing the Hard Drive

Installing the Hard Drive

Removing the Interposer

Replacing the Interposer

Removing the Hard Drive

CAUTION:

If you remove the hard drive from the computer when the drive is warm, do not touch the metal housing of the hard drive.

CAUTION:

Before performing the following procedures, read the safety instructions in your System Information Guide.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as the back panel) on the computer.

NOTICE:

To prevent data loss, turn off your computer before removing the hard drive. Do not remove the hard drive while the computer is on, in

standby mode, or in hibernate mode.

NOTICE:

Hard drives are extremely fragile; even a slight bump can damage the drive.

NOTE:

Dell does not guarantee compatibility or provide support for hard drives from sources other than Dell.

To remove the hard drive in the hard drive bay:

1. Follow the instructions in

"Preparing to Work Inside the

2. Turn the computer over, and remove the two M3 x 3-mm screws.

NOTICE:

When the hard drive is not in the computer, store it in protective, antistatic packaging. See "Protecting Against Electrostatic Discharge" in your

System Information Guide.

1 M3 x 3-mm screws (2) 2864D

2 hard drive

See Mini RSL

3. Slide the hard drive out of the computer.

Computer" to remove the battery and prepare the computer for work.