Dell D800 - Latitude 15.4" Notebook 서비스 매뉴얼 - 페이지 11
{카테고리_이름} Dell D800 - Latitude 15.4" Notebook에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell D800 - Latitude 15.4" Notebook 49 페이지. Dell latitude e6400: quick start
Dell D800 - Latitude 15.4" Notebook에 대해서도 마찬가지입니다: 서비스 매뉴얼 (3 페이지), 설정 및 기능 정보 (8 페이지)
페이지 인쇄
6. Lift out the microprocessor module.
Installing the Microprocessor Module
NOTICE:
Ensure that the cam lock is in the fully open position before seating the microprocessor module. Seating the microprocessor module properly in
the ZIF socket does not require force.
NOTICE:
A microprocessor module that is not properly seated can result in an intermittent connection or permanent damage to the microprocessor and
ZIF socket.
1. Align the pin-1 corner of the microprocessor module with the pin-1 corner of the ZIF socket, and insert the microprocessor module.
NOTE:
The pin-1 corner of the microprocessor module has a triangle that aligns with the triangle on the pin-1 corner of the ZIF socket.
NOTICE:
You must position the microprocessor module correctly in the ZIF socket to avoid permanent damage to the module and the socket.
When the microprocessor module is correctly seated, all four corners are aligned at the same height. If one or more corners of the module are higher
than the others, the module is not seated correctly.
2. Tighten the ZIF socket by turning the cam screw clockwise to secure the microprocessor module to the system board.
3. Perform the steps in
"Removing the Microprocessor
4. Update the BIOS using a flash BIOS update program floppy disk or CD. For instructions on how to flash the BIOS, see
Back to Contents Page
Module" in reverse order, beginning with step 4.
"Flashing the
BIOS."