Dell Dimension 5150 서비스 매뉴얼 - 페이지 8
{카테고리_이름} Dell Dimension 5150에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Dimension 5150 40 페이지. Setting up your computer
Dell Dimension 5150에 대해서도 마찬가지입니다: 설정 (2 페이지), 설정 매뉴얼 (2 페이지), 설정 매뉴얼 (2 페이지)
페이지 인쇄
Back to Contents Page
Microprocessor Module
Dell™ Inspiron™ 1100, 5100, and 5150 Service Manual
Removing the Microprocessor Module
CAUTION:
CAUTION:
your computer's electronic components. You can do so by touching an unpainted metal surface.
NOTICE:
prevent intermittent contact between the cam screw and microprocessor.
NOTICE:
1. Follow the instructions in
2. Remove the keyboard.
3. Remove the
4. For the Inspiron 5150, remove the
5. Remove the
NOTICE:
6. To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.
The ZIF-socket cam screw secures the microprocessor to the system board. Take note of the arrow on the ZIF-socket cam screw.
1 ZIF-socket cam screw
2 ZIF socket
3 microprocessor module
4 pin-1 corner of
microprocessor
5 triangle on system board
7. Use a microprocessor extraction tool to remove the microprocessor module.
Great user manuals database on
Before performing the following procedures, read the safety instructions in your Owner's Manual.
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
Press and hold the microprocessor down by applying slight pressure to the center of the microprocessor while turning the cam screw to
To avoid damage to the microprocessor, hold the screwdriver so that it is perpendicular to the microprocessor when turning the cam screw.
"Preparing to Work Inside the
EMI
shield.
display panel
microprocessor thermal-cooling
assembly.
When removing the microprocessor module, pull the module straight up. Be careful not to bend the pins on the microprocessor module.
UserManuals.info
Computer."
and then remove the
palm
rest.