Dell E5400 - Latitude - Core 2 Duo 2.4 GHz 사용 설명서 - 페이지 18

{카테고리_이름} Dell E5400 - Latitude - Core 2 Duo 2.4 GHz에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell E5400 - Latitude - Core 2 Duo 2.4 GHz 34 페이지. Latitude ultrabook series; e-family series; mobile precision series
Dell E5400 - Latitude - Core 2 Duo 2.4 GHz에 대해서도 마찬가지입니다: 사용 설명서 (38 페이지), 제품 설명서 (39 페이지), 사양 (2 페이지), 설정 및 기능 정보 (10 페이지), 사용 설명서 (32 페이지), 시스템 보드 교체 (4 페이지), 사용 설명서 (46 페이지), 매뉴얼 (46 페이지), 서비스 매뉴얼 (43 페이지), 사용 설명서 (46 페이지)

페이지 인쇄

Dell E5400 - Latitude - Core 2 Duo 2.4 GHz 사용 설명서

If the SATA mode is configured in AHCI, IRRT or RAID mode, the IMSM

driver must be installed during the initial operating system installation stages.

The IMSM driver is only available from Dell.

Microsoft operating systems other than those specified at the beginning of

this document do not include this driver. If SATA configuration mode in the

BIOS is set to either AHCI, IRRT or RAID install the following Dell IMSM

driver:

Intel Matrix Storage Manager driver, found under SATA Drivers on Dell's

•

driver and downloads support web site (support.dell.com)

Follow these steps to install the IMSM driver:

For Microsoft XP 32-Bit and 64-Bit operating systems:

•

Installing the Intel IMSM driver using the Floppy Drive:

–

Boot to the Dell Recovery DVD (RDVD) and select Create RAID

driver from the list of items. You will need a floppy disk drive and a

diskette for this selection. The IMSM driver must be on the root of

the A:\

–

Once the driver is extracted and stored on the target diskette, boot to

the operating system CD and start the installation.

–

In the initial stage of Windows Setup, press <F6> to install the third-

party IMSM SCSI or RAID drivers.

–

When prompted, insert the floppy disk containing the IMSM driver

and follow the instructions provided by Windows Setup.

After reading the floppy disk, select Intel(R) ICH9M-E/M SATA

–

AHCI Controller if in AHCI mode, or Intel(R) ICH8M-E/ICH9M-

eSATA RAID Controller if in IRRT mode.

For Microsoft Vista 32-Bit and 64-Bit operating systems:

•

Installing the Intel IMSM driver after the installation of the operating

system:

–

Boot to the operating system DVD, and start the installation.

–

After completing the OS installation, insert the Dell RDVD.

–

Select the IMSM driver and follow the installation procedure.

If Intel Rapid Recovery or RAID Technologies is to be used, ensure the

following:

Dell Business Client E-Family Re-Image How-To Guide