Dell E5500 - Latitude - Core 2 Duo 2.53 GHz 시스템 보드 교체 - 페이지 2

{카테고리_이름} Dell E5500 - Latitude - Core 2 Duo 2.53 GHz에 대한 시스템 보드 교체을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell E5500 - Latitude - Core 2 Duo 2.53 GHz 4 페이지. Latitude ultrabook series; e-family series; mobile precision series
Dell E5500 - Latitude - Core 2 Duo 2.53 GHz에 대해서도 마찬가지입니다: 사용 설명서 (38 페이지), 제품 설명서 (39 페이지), 사양 (2 페이지), 설정 및 기능 정보 (10 페이지), 사용 설명서 (32 페이지), 사용 설명서 (34 페이지), 사용 설명서 (46 페이지), 매뉴얼 (46 페이지), 사용 설명서 (46 페이지)

페이지 인쇄

Dell E5500 - Latitude - Core 2 Duo 2.53 GHz 시스템 보드 교체

You should see one of the following four configuration-mode labels on the inside

of the chassis:

NOTE:

If the original configuration-mode label is missing, damaged, or otherwise

illegible, contact Dell to obtain your configuration-mode number (see your computer

documentation for contact information).

3 Replace the bottom access panel.

NOTE:

Board" in your Service Manual.

4 Disconnect the network cable, if applicable, and the mass storage devices like

hard drives or USB flash keys.

5 Connect the AC adapter and turn on the computer.

An initialization screen is displayed. The green text on the initialization screen

prompts you to select the appropriate configuration for your computer.

CAUTION:

Ensure that you use the correct configuration-mode number. Once you

have selected a configuration, you cannot change the management mode as this

process is not reversible. If you make the wrong selection, your computer may not

operate as it should.

6 Enter the configuration-mode number that you obtained from the label inside

the bottom access panel.

7 If this is the correct configuration-mode number, select Y at the prompt.

Once the initialization is complete, the computer shuts down.

8 Reconnect the network cable and the mass storage devices like hard drives or

USB flash keys.

9 Restart the computer.

For information on replacing the system board, see "Replacing the System