Avtech AVC796 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} Avtech AVC796에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avtech AVC796 7 페이지. H.264 network dvr
페이지 인쇄1. FRONT AND REAR PANELS
1.1 Front Panel
1)
LED Indicators
HDD is reading or recording.
DVR is powered on.
An alarm is triggered.
Timer recording is on.
Under playback status (For 4CH model only).
HDD is full (For 16CH / 8CH models only).
2)
MENU
Press "MENU" to enter the main menu.
3)
ENTER
Press "ENTER" to confirm the setting.
4)
SLOW
Under the playback mode, press "SLOW" to show slow playback.
5)
ZOOM
Press "ZOOM" to enlarge the picture of selected channel (under the live mode).
6)
Press "
" to show the 4 channel display mode.
7)
SEQ
Press "SEQ" to activate the call monitor function and press "SEQ" again to escape the call monitor mode.
8)
POWER
Press to turn on / off the DVR.
(Under the recording mode, please stop recording before turning off the DVR).
9)
CH1 ~ 16 / CH1 ~ 8 / CH1 ~ 4
Press the channel number buttons to select the channel to display.
10) PLAY
Press to playback the recorded data.
11)
▲ (PAUSE/+) / ▼ (STOP/-) / ◄ (REW) / ► (FF)
Press ▲ / ▼ / ◄ / ► to move the cursor up / down / left / right.
Under the playback mode, press " PAUSE" to pause playback.
Under the playback mode, press " STOP" to stop playback.
Under the playback mode, press "FF" to fast forward.
Under the playback mode, press "REW" to fast rewind.