Dell Inspiron 1000 서비스 매뉴얼 - 페이지 8

{카테고리_이름} Dell Inspiron 1000에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Inspiron 1000 46 페이지. Dell vostro 1000 quick setup guide
Dell Inspiron 1000에 대해서도 마찬가지입니다: 설정 매뉴얼 (2 페이지), 하드 드라이브 제거하기 (9 페이지), 사양 (2 페이지), 설정 매뉴얼 (2 페이지), 설정 매뉴얼 (2 페이지), 컴퓨터 설정 (2 페이지), 컴퓨터 설정 (2 페이지)

Dell Inspiron 1000 서비스 매뉴얼
Back to Contents Page
  ExpressCard/Hard-Drive Bay Assembly
Dell™ Latitude™ 131L/
Dell Vostro™ 1000 Service Manual
  Removing the ExpressCard/Hard-Drive Bay Assembly
  Replacing the ExpressCard/Hard-Drive Bay Assembly
 
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
computer.
 Removing the ExpressCard/Hard-Drive Bay Assembly
 
1. Follow the instructions in
Before You
 
2. Remove the hard drive (see
 
3. Remove the optical drive (see
 
4. Remove the hinge cover (see
 
5. Remove the keyboard (see
 
6. Remove the display assembly (see
 
7. Remove the palm rest (see
 
8. Remove the six M2.5x 5-mm screws from the ExpressCard/hard-drive bay assembly.
1
M2.5 x 5-mm screws (6)
 
9. Remove the assembly from the system board.
 Replacing the ExpressCard/Hard-Drive Bay Assembly
 
1. At a 45-degree angle, insert the end of the ExpressCard/hard-drive bay assembly into its access hole on the side of the computer base.
 
2. Lower the assembly aligning the screw holes on the assembly with the holes on the system board.
 
3. Replace the six M2.5x 5-mm screws from the assembly.
Begin.
Removing the Hard
Drive).
Removing an Optical
Drive).
Removing the Hinge
Cover).
Removing the
Keyboard).
Removing the Display
Assembly).
Removing the Palm
Rest).
2
ExpressCard/hard-drive bay assembly
Before Working Inside Your
Computer) before working inside the