Dell Inspiron 1018 서비스 매뉴얼 - 페이지 27
{카테고리_이름} Dell Inspiron 1018에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Inspiron 1018 47 페이지. Service manual
Dell Inspiron 1018에 대해서도 마찬가지입니다: 서비스 매뉴얼 (47 페이지)
페이지 인쇄
Back to Contents Page
Status Lights Board
Dell™ Inspiron™ 1018 Service Manual
Removing the Status Lights Board
Replacing the Status Lights Board
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Status Lights Board
1. Follow the instructions in
Before You
2. Remove the battery (see
Removing the
3. Remove the keyboard (see
4. Remove the hard-drive assembly (follow the instructions from
5. Remove the palm rest assembly (see
6. Remove the memory module (see
7. Push the connector-tab up and disconnect the status lights board cable from the system board connector.
8. Remove the screw that secures the status lights board to the computer base.
9. Lift the status lights board off the computer base.
1
screw
2
status lights board cable
3
status lights board
Replacing the Status Lights Board
1. Follow the instructions in
Before You
Begin.
Battery).
Removing the
Keyboard).
Removing the Palm Rest
Removing the Memory
Module).
Begin.
Removing the
step 4
to
step 6
in
Removing the Hard
Assembly).
Battery) before working inside the
Drive).