Allied Telesis AT-GS2002/SP 사양

{카테고리_이름} Allied Telesis AT-GS2002/SP에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis AT-GS2002/SP 2 페이지. Ethernet bridging converter

페이지 인쇄

Datasheet |

Media Converters

AT -GS2002/SP

Ethernet Bridging Converter

AT -GS2002/SP

10/100/1000T to 1000 SFP,

standalone bridging converter

Overview

The AT-GS2002/SP Ethernet bridging converters

are designed to extend the distance of your

network by interconnecting LAN devices that

are physically separated by large distances. These

bridging converters have the functionality to

connect any managed/unmanaged 10Mbps,

100Mbps, or 1000Mbps (1Gbps) switch or hub

using standard 10/100/1000T RJ-45 connections

and convert the electrical signal to fiber optical

signal via its SFP port.

Extend the Distance of Ethernet

Each AT-GS2002/SP bridging converter features

a 10/100/1000T twisted pair port and an SFP

port. The twisted pair port has an RJ-45

connector and a maximum operating distance

of 100 meters (328 feet). These units can

operate at half- and full-duplex.

The AT-GS2002/SP fiber optic port has a SFP

slot and the maximum operating distance and

speed is dependent on the SFP.

The AT-GS2002/SP supports SFPs operating at

Gigabit Ethernet (1000Mbps) speeds.

Allied Telesis

Standalone or Rack-mounted

Each small bridging converter is powered by an

external power supply unit for use in

standalone applications. Where multiple media

converters are used, up to 12 standalone

devices can be inserted into a low-cost

AT-MCR12 rack-mount chassis, allowing all the

converters to be powered by a single internal

power supply. In critical applications, a second

load sharing internal power supply can be

installed into the rack-mount chassis.The

bridging converters can also be 19" rack-

mounted either individually using the AT-WLMT,

AT-TRAY1 or up to four devices using the

AT-TRAY4.

Hassle Free Support

All Allied Telesis Ethernet bridging converters

have a limited lifetime warranty and free

technical support, ensuring trouble-free

installation.

Key Features

•

Converts speed as well as media type

•

Extends Gigabit networks to distances up to

80km

•

Supports 1000Mbps SFP modules

•

Auto MDI/MDI-X

•

Auto-negotiation (IEEE 802.3u-compliant)

•

Store and forward data packet handling

•

Support MissingLink™ and Smart

MissingLink™

•

Transparent to IEEE 802.1Q VLAN packets

•

Automatic address learning and aging

•

System and port LEDs

•

External AC power adapter

•

Rack-mountable using optional AT-WLMT,

AT-MCR12,TRAY4, or TRAY1 chassis

Ordering Information

AT-GS2002/SP-xx

Gigabit Ethernet bridging converter,

10/100/1000T to SFP (550m to 80km)

Where xx =

10 AC power supply, US power adapter

20 AC power supply, European power adapter

30 AC power supply, UK power adapter

40 AC power supply, Australian power adapter

AT-SP Series

1000Mbps SFP product line