Dell Inspiron 1100 서비스 매뉴얼 - 페이지 9

{카테고리_이름} Dell Inspiron 1100에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Inspiron 1100 40 페이지.

페이지 인쇄

Installing the Microprocessor Module

NOTICE:

the ZIF socket does not require force.

NOTICE:

ZIF socket.

1. Align the pin-1 corner of the microprocessor module so that it points to the triangle on the system board, and insert the microprocessor module into the

ZIF socket.

When the microprocessor module is correctly seated, all four corners are aligned at the same height. If one or more corners of the module are higher

than the others, the module is not seated correctly.

NOTICE:

2. Tighten the ZIF socket by turning the cam screw clockwise to secure the microprocessor module to the system board.

3. Wipe the thermal grease off of the microprocessor thermal-cooling assembly with a clean paper towel.

4. Squeeze all of the contents of the thermal grease packet (provided with the kit) on to the microprocessor thermal-cooling assembly.

5. Replace the

6. For the Inspiron 5150, replace the

7. Replace the

8. Replace the keyboard.

Update the BIOS

Back to Contents Page

Great user manuals database on

Ensure that the cam lock is in the fully open position before seating the microprocessor module. Seating the microprocessor module properly in

A microprocessor module that is not properly seated can result in an intermittent connection or permanent damage to the microprocessor and

Hold the microprocessor down while turning the cam screw to prevent intermittent contact between the cam screw and microprocessor.

microprocessor thermal-cooling

assembly.

palm rest

and then replace the

EMI

shield.

using a flash BIOS update program CD.

UserManuals.info

display

panel.