Dell Inspiron 1300 서비스 매뉴얼 - 페이지 12
{카테고리_이름} Dell Inspiron 1300에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Inspiron 1300 45 페이지.
Dell Inspiron 1300에 대해서도 마찬가지입니다: 서비스 매뉴얼 (45 페이지)
페이지 인쇄Back to Contents Page
Microprocessor Module
Dell™ Inspiron™ 1300/B120/B130 Service Manual
Removing the Microprocessor Module
Installing the Microprocessor Module
Removing the Microprocessor Module
CAUTION:
Before performing the following procedures, read the safety instructions in the Product Information Guide.
CAUTION:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.
NOTICE:
Press and hold the microprocessor down by applying slight pressure to the center of the microprocessor while turning the cam screw to
prevent intermittent contact between the cam screw and microprocessor.
NOTICE:
To avoid damage to the microprocessor, hold the screwdriver so that it is perpendicular to the microprocessor when turning the cam screw.
1. Follow the instructions in
Before Working Inside Your
2. Turn over the computer.
3. Remove the microprocessor thermal-cooling assembly. See
NOTICE:
When removing the microprocessor module, pull the module straight up. Be careful not to bend the pins on the microprocessor module.
4. To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.
The ZIF-socket cam screw secures the microprocessor to the system board. Take note of the arrow on the ZIF-socket cam screw.
1
ZIF-socket cam screw
2
5. Use a microprocessor extraction tool to remove the microprocessor module.
Installing the Microprocessor Module
NOTICE:
Ensure that the cam lock is in the fully open position before seating the microprocessor module. Seating the microprocessor module properly in
the ZIF socket does not require force.
NOTICE:
A microprocessor module that is not properly seated can result in an intermittent connection or permanent damage to the microprocessor and
ZIF socket.
Computer.
Removing the Microprocessor Thermal-Cooling
ZIF-socket
3
pin-1 corner of microprocessor
Assembly.