Allied Telesis AT-MC101XL 설치 매뉴얼 - 페이지 2
{카테고리_이름} Allied Telesis AT-MC101XL에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis AT-MC101XL 2 페이지. Mc10x series fast ethernet media converters
Allied Telesis AT-MC101XL에 대해서도 마찬가지입니다: 데이터시트 (2 페이지)
페이지 인쇄
2.
Slide your media converter into the bracket and align
the its mounting holes with those on the DINRAIL
bracket as shown in the figure for your media
converter. Secure the media converter to the bracket
using the two M3 mounting screws provided.
1517
Figure 1 - Attaching the DINRAIL Bracket to an
AT-MC10x, AT-MC1004, AT-MC1008/GB, AT-MC1008/SP,
AT-GS2002/SP, AT-FS232, AT-FS201, or AT-FS202
Media Converter
1523
Figure 2 - Attaching the DINRAIL Bracket to an
AT-MC605 Media Converter
PN 613-001150 Rev B
Figure 3 - Attaching the DINRAIL Bracket to an
AT-PC232/POE or AT-PC2002/POE Media Converter
3.
For all of the media converters except the AT-PC232/
POE and the AT-PC2002/POE, install the DC power
cord and secure it to the bracket with a tie-wrap, as
shown in Figure 4, "Securing the DC power cord to the
DINRAIL bracket".
Figure 4 - Securing the DC power cord to the DINRAIL
bracket
Page 2
PN 613-001150 Rev B
2.
Slide your media converter into the bracket and align
the its mounting holes with those on the DINRAIL
bracket as shown in the figure for your media
converter. Secure the media converter to the bracket
using the two M3 mounting screws provided.
1522
Figure 1 - Attaching the DINRAIL Bracket to an
AT-MC10x, AT-MC1004, AT-MC1008/GB, AT-MC1008/SP,
AT-GS2002/SP, AT-FS232, AT-FS201, or AT-FS202
1521
Figure 2 - Attaching the DINRAIL Bracket to an
AT-MC605 Media Converter
PN 613-001150 Rev B
Page 3
1517
3.
Media Converter
1523
Figure 4 - Securing the DC power cord to the DINRAIL
Page 2
PN 613-001150 Rev B
1522
Figure 3 - Attaching the DINRAIL Bracket to an
AT-PC232/POE or AT-PC2002/POE Media Converter
For all of the media converters except the AT-PC232/
POE and the AT-PC2002/POE, install the DC power
cord and secure it to the bracket with a tie-wrap, as
shown in Figure 4, "Securing the DC power cord to the
DINRAIL bracket".
1521
bracket
Page 3