Dell Inspiron 1501 - Turion X2 TL-60 2GB DDR2 서비스 매뉴얼 - 페이지 19
{카테고리_이름} Dell Inspiron 1501 - Turion X2 TL-60 2GB DDR2에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Inspiron 1501 - Turion X2 TL-60 2GB DDR2 41 페이지. Dell inspiron 1501 setting up
Dell Inspiron 1501 - Turion X2 TL-60 2GB DDR2에 대해서도 마찬가지입니다: 설정 매뉴얼 (2 페이지), 설정 매뉴얼 (2 페이지), 컴퓨터 설정 (2 페이지)
페이지 인쇄
3. Replace the six rubber display bumpers around the display bezel.
Display Panel
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE:
To help prevent damage to the system board, you must remove the main battery (see
begin working inside the computer.
Removing the Display Panel
1. Follow the instructions in
Before You
2. Remove the display assembly (see
3. Remove the display bezel (see
4. Remove the eight M2 x 3-mm screws (four on each side of the display panel).
5. Lift the display panel out of the display back cover.
1 display panel
4 grounding wire and captive screw
6. Press in both sides of the top flex-cable connector, and pull the top flex-cable connector away from the display connector.
7. Pull straight up on the pull-tab to disconnect the bottom flex-cable connector from the inverter connector.
Begin.
Removing the Display
Assembly).
Removing the Display
Bezel).
2 display back cover
3 M2 x 3-mm screws (8)
Before Working Inside Your
Computer) before you