Dell Inspiron 1501 - Turion X2 TL-60 2GB DDR2 서비스 매뉴얼 - 페이지 38

{카테고리_이름} Dell Inspiron 1501 - Turion X2 TL-60 2GB DDR2에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Inspiron 1501 - Turion X2 TL-60 2GB DDR2 41 페이지. Dell inspiron 1501 setting up
Dell Inspiron 1501 - Turion X2 TL-60 2GB DDR2에 대해서도 마찬가지입니다: 설정 매뉴얼 (2 페이지), 설정 매뉴얼 (2 페이지), 컴퓨터 설정 (2 페이지)

페이지 인쇄
Dell Inspiron 1501 - Turion X2 TL-60 2GB DDR2 서비스 매뉴얼
Back to Contents Page
  System Board
Dell™ Inspiron™ 1501 Service Manual
  Removing the System Board
  Replacing the System Board
 
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
computer.
The system board BIOS chip contains the Service Tag, which is also visible on a barcode label on the bottom of the computer. The replacement kit for the
system board includes a CD that provides a utility for transferring the Service Tag to the replacement system board.
 Removing the System Board
 
1. Follow the instructions in
Before You
 
2. Remove the hard drive (see
 
3. Remove the optical drive (see
 
4. Remove the memory module(s) (see
 
5. Remove the modem (see
Removing the
 
6. Remove the hinge cover (see
 
7. Remove the keyboard (see
 
8. Remove the Mini-Card (see
 
9. Remove the display assembly (see
 
10. Remove the palm rest (see
NOTE:
It is not required but is highly recommended that you remove the fan.
 
11. Remove the fan (see
Removing a
 
12. Remove the processor thermal-cooling assembly (see
 
13. Remove the processor (see
 
14. Remove the ExpressCard/hard-drive bay assembly (see
 
15. Remove the two hex-nut video screws from the back of the computer.
1
hex-nut video screws (2)
 
Begin.
Removing the Hard
Drive).
Removing an Optical
Drive).
Removing the Memory
Module(s)).
Modem).
Removing the Hinge
Cover).
Removing the
Keyboard).
Removing a
Mini-Card).
Removing the Display
Assembly).
Removing the Palm
Rest).
Fan).
Removing the Processor Thermal-Cooling
Removing the Processor
Module).
Removing the ExpressCard/Hard-Drive Bay
Before Working Inside Your
Computer) before working inside the
Assembly).
Assembly).