Dell Inspiron 3200 사용자 설명서 - 페이지 2
{카테고리_이름} Dell Inspiron 3200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Inspiron 3200 9 페이지. Dell inspiron 3000: specifications
Dell Inspiron 3200에 대해서도 마찬가지입니다: 유틸리티 및 드라이버 설치 (4 페이지), 사양 (6 페이지)
페이지 인쇄
- 1. Attach External Devices to Port Replicator
- 2. Connecting Computer to Port Replicator
- 3. Port Replicator
- 4. Detaching Computer from Port Replicator
- 5. The Port Replicator
- 6. Technical Specifications
- 7. Regulatory Notices
- 8. I C Notice (Canada Only)
- 9. VCCI Notices (Japan Only)
- 10. K Orean Regulatory Notice
- 11. Class a Device
- 12. Class B Device
Use the following instructions to attach external devices
to the port replicator:
1.
Refer to Figure 1 to attach external devices to the
appropriate connectors on the back of the port
replicator.
CAUTION: The connectors on the back of the
port replicator are inverted (as viewed while
facing the back of the port replicator). Before
attaching any cables, verify that the connector
pins are aligned correctly to avoid damaging
the connectors.
NOTES: If the cable connector from the external
device has thumbscrews, be sure to tighten them to
ensure a proper connection.
To connect the computer to a network, you must
install a network PC Card in your computer. Like-
wise, to connect the computer to a small computer
system interface (SCSI) device, you must attach a
keyboard connector
PS/2 mouse connector
lock slot
MIDI/game
connector
dual USB
connector
serial connector
parallel connector
monitor connector
Figure 1. Attaching External Devices to the Port Replicator
2
Dell Inspiron Port Replicator I User's Guide
2.
C
Port Replicator
Use the following instructions to connect your computer
to the port replicator.
1.
2.
3.
speaker
line-out connector
microphone connector
SCSI PC Card to your computer. See "Using Inter-
nal Devices" in your online Dell Inspiron 3000
User's Guide for information about using PC Cards.
For detailed information on using external devices
with your portable computer, see "Using External
Devices" in your online System User's Guide.
Connect the external devices to their power
sources, if applicable.
onnecting the Computer to the
Save all your work, and exit all application
programs.
Shut down the computer.
If you have not already done so, connect the AC
adapter to the port replicator, and plug the AC
power cable into an AC power source.
line-in connector
speaker
AC adapter connector