Dell Inspiron 580S 서비스 매뉴얼 - 페이지 23
{카테고리_이름} Dell Inspiron 580S에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Inspiron 580S 43 페이지. Comprehensive specifications
Dell Inspiron 580S에 대해서도 마찬가지입니다: 사양 (6 페이지)
페이지 인쇄
Back to Contents Page
Fans
Dell™ Inspiron™ 580s Service Manual
Removing the Processor Fan and Heat Sink Assembly
Replacing the Processor Fan and Heat Sink Assembly
Removing the Chassis Fan
Replacing the Chassis Fan
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING:
To guard against likelihood of electric shock, laceration by moving fan blades or other unexpected injuries, always unplug your
computer from the electrical outlet before removing the cover.
WARNING:
Do not operate your equipment with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)
removed.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
Removing the Processor Fan and Heat Sink Assembly
CAUTION:
The processor fan with the heat sink is one single unit. Do not try to remove the fan separately.
CAUTION:
Do not touch the fan blades when you are removing the processor fan and heat sink assembly. This could damage the fan.
1. Follow the procedures in
Before You
2. Remove the computer cover (see
3. Disconnect the processor fan cable from the system board connector (see
4. Carefully move away any cables that are routed over the processor fan and heat sink assembly.
CAUTION:
Despite having a plastic shield, the processor fan and heat sink assembly may be very hot during normal operation. Be sure that it has
had sufficient time to cool before you touch it.
5. Depending on the processor fan and heat sink assembly installed in your computer, perform the following steps:
Type 1
a. Align the tip of a flat-blade screwdriver with the fastener grooves and rotate the four fasteners in anticlockwise direction to unlock them.
b. Lift the processor fan and heat sink assembly out of the computer.
Begin.
Removing the Computer
Cover).
System Board
Components).