Dell Inspiron E1505 서비스 매뉴얼 - 페이지 19

{카테고리_이름} Dell Inspiron E1505에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Inspiron E1505 46 페이지.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as the back panel) on the computer.

NOTICE:

To help prevent damage to the system board, you must remove the main battery (see

begin working inside the computer.

1. Follow the instructions in

Before Working Inside Your

2. Remove the display assembly (see

3. Remove the six rubber display bumpers.

4. Remove the six M2.5 x 4.2-mm screws around the display bezel.

M2.5 x 4.2-mm screws(6)

NOTICE:

Removal of the bezel from the display back cover requires extreme care to avoid damage to the bezel.

5. Use your fingers to separate the bezel from the display back cover by pulling the lower-right corner of the bezel down toward the bottom edge of the

display assembly to clear the tab on the bottom of the lower-right corner. Then pull the bezel toward the right side of the display assembly to clear the

tab on the side of the lower-right corner. Continue this motion until you have cleared all sides of the display bezel.

display bezel

Replacing the Display Bezel

1. Starting at any corner, use your fingers to gently snap the bezel into place to secure it to the display panel.

2. Replace the six M2.5 x 4.2-mm screws around the display bezel.

3. Replace the six rubber display bumpers around the display bezel.

Computer.

Removing the Display

Assembly).

rubber display bumpers (6)

display panel

Before Working Inside Your

display bezel

Computer) before you