Avtech KPD616 빠른 매뉴얼 - 페이지 9
{카테고리_이름} Avtech KPD616에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avtech KPD616 15 페이지. Mpeg-4 dvr quick
Avtech KPD616에 대해서도 마찬가지입니다: 빠른 매뉴얼 (10 페이지)
페이지 인쇄
3.3 Power Setup
This device should be operated only with the type of power source indicated on the manufacturer's label. Connect
the indicated AC power cord to the power adapter, and plug into an electrical outlet. Power LED "
It takes approximately 10 to 15 seconds to boot the system.
3.4 Date and Time Setting
Before operating your DVR, please set the date and time on your DVR first.
Press
(menu) button and enter the password to go to the quick-start menu list. The default admin password is
0000. Move the cursor to the icon
CHANNEL TITLE
EVENT STATUS
IMAGE SIZE
QUALITY
IMAGE PER SECOND
RECORD TIMER
DETECTION TIMER
DATE
FORMAT
DAYLIGHT SAVING
ADVANCE
SELECT
3.5 Password Setting
Press
(menu) button and enter the password to go to the quick-start menu list. And then move the cursor to
"ADVANCE" to enter the advanced setting menu.
In the "ADVANCE" menu, move the cursor to "
(enter) button to enter the submenu to set the password (four digits). The default admin password is 0000.
SERIAL TYPE
BAUD RATE
HOST ID
PASSWORD
RESET DEFAULT
CLEAR HDD
UPGRADE
AUTO KEYLOCK (SEC)
LANGUAGE
VIDEO FORMAT
VERSION
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTINGS
SELECT
BACK
and you can set the date / time / daylight saving in this menu list.
QUICK START
BACK
NEXT
SYSTEM INFO
RS485
2400
0
XXXX
RESET
HDD-MASTER-1
START
30
ENGLISH
NTSC
1049-1007-1011-1001-L6-6C1B
NEXT
ENTER
ON
ON
CIF
BEST
120
OFF
OFF
2007 / AUG / 08
21 : 30 : 00
Y / M / D
OFF
ENTER
SYSTEM INFO ". Select "PASSWORD" and press
-8-
" will be on as blue.