Dell INSPIRON Inspiron 5000 제거 및 설치 - 페이지 27
{카테고리_이름} Dell INSPIRON Inspiron 5000에 대한 제거 및 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell INSPIRON Inspiron 5000 29 페이지. Port replicator
Dell INSPIRON Inspiron 5000에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (2 페이지), 시작하기 매뉴얼 (2 페이지), 사용자 설명서 (31 페이지)
페이지 인쇄
Removing and Replacing Parts: Dell Inspiron 5000 Series
5.
Once you have disengaged all of the retaining tabs, lift the bezel from the LCD panel.
Panel Removal
NOTICE: It is not necessary to remove the display locking tabs when removing the
panel.
1.
Remove the two screws from each side of the panel.
2.
Disconnect the cold cathode fluorescent lamp (CCFL) cable from the bottom of the panel.
3.
Disconnect the flex cable from the back of the LCD panel.
4.
Lift the panel from the back cover.
LED/Inverter Board Removal
1.
Remove the two screws from the LED/inverter board.
2.
Disconnect the flex cable from the ZIF connector on the bottom side of the LED/inverter board.
Flex Cable Removal
1.
Remove the grounding tape that secures the wire harness to the back cover.
2.
Carefully snap out the flex cable pass-though housing from the back cover.
3.
Ease the flex cable over to one side.
4.
Insert a flat instrument into the wide opening of the pass-through housing.
Be careful not to damage the flex cable.
5.
Carefully ease the cover from the pass-through housing.
15-Inch UXGA, XGA, and SXGA+ Display Disassembly
file:///c|/docs/blanco E-doc/removing.htm (27 of 29) [9/1/2000 3:32:00 PM]