Dell inspiron M4040/14-N4050 소유자 매뉴얼 - 페이지 8
{카테고리_이름} Dell inspiron M4040/14-N4050에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell inspiron M4040/14-N4050 44 페이지.
페이지 인쇄Back to Contents Page
Camera Module
Dell Inspiron M4040/14-N4050 Owner's Manual
Removing the Camera Module
Replacing the Camera Module
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery, see
Removing the Camera Module
1. Follow the instructions in
Before You
2. Remove the battery. See
Removing the
3. Follow the instructions from
4. Remove the optical drive. See
5. Remove the USB board. See "Removing the USB Board" on page 47.
6. Remove the hinge cover. See
7. Remove the display assembly. See
8. Remove the display bezel. See
9. Disconnect the camera cable from the connector on the camera module.
10. Release the tabs that secure the camera module to the display cover and lift the camera module off the display cover.
1
camera module
3
tabs (2)
Replacing the Camera Module
Begin.
Battery.
step 3
to
step 8
in
Removing the Palm-Rest
Removing the Optical
Drive.
Removing the Hinge
Cover.
Removing the Display
Assembly.
Removing the Display
Bezel.
2
camera cable
Removing the
Battery, before working inside the computer.
Assembly.