Dell Inspiron M5030 서비스 매뉴얼 - 페이지 13

{카테고리_이름} Dell Inspiron M5030에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Inspiron M5030 42 페이지. Service guide
Dell Inspiron M5030에 대해서도 마찬가지입니다: 서비스 매뉴얼 (42 페이지)

페이지 인쇄

processor heat sink

Replacing the Processor Heat Sink

NOTE:

This procedure assumes that you have already removed the processor heat sink and are ready to replace it.

1. Follow the instructions in

Before You

2. Place the processor heat sink on the system board.

3. Align the four captive screws on the processor heat sink with the screw holes on the system board and tighten the screws in sequential order (indicated

on the processor heat sink).

NOTE:

The appearance and number of screws on the processor heat sink may vary based on the your computer model.

4. Route the cables through the routing guides. Connect the fan cable and display cable to their connectors on the system board.

5. Replace the adhesive tape that secures the display cable to the processor heat sink.

6. Replace the palm rest (see

7. Replace the keyboard (see

8. Replace the battery (see

Replacing the

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

Back to Contents Page

captive screws (4)

Begin.

Replacing the Palm

Rest).

Replacing the

Keyboard).

Battery).