Dell Inspiron N3010 서비스 매뉴얼 - 페이지 13
{카테고리_이름} Dell Inspiron N3010에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Inspiron N3010 49 페이지. Service manual
Dell Inspiron N3010에 대해서도 마찬가지입니다: 서비스 매뉴얼 (49 페이지)
페이지 인쇄
NOTE:
If a new processor module is installed, you will receive a new thermal-cooling assembly, which will include an affixed thermal pad, or you will
receive a new thermal pad along with documentation to illustrate proper installation.
1. Follow the instructions in
Before You
2. Align the pin-1 corner of the processor module with the pin-1 corner of the ZIF socket, then place the processor module.
NOTE:
The pin-1 corner of the processor module has a triangle that aligns with the triangle on the pin-1 corner of the ZIF socket.
When the processor module is properly seated, all four corners are aligned at the same height. If one or more corners of the processor module are
higher than the others, the processor module is not seated properly.
CAUTION:
To avoid damage to the processor module, hold the screwdriver such that it is perpendicular to the processor module when turning the
cam screw.
3. Tighten the ZIF socket by turning the cam screw clockwise to secure the processor module to the system board.
4. Replace the processor heat sink (see
5. Follow the instructions from
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Begin.
Replacing the Processor Heat
step 7
to
step 21
in
Replacing the System
Sink).
Board.