Dell Inspiron PP42L 서비스 매뉴얼 - 페이지 29
{카테고리_이름} Dell Inspiron PP42L에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Inspiron PP42L 48 페이지.
페이지 인쇄
Back to Contents Page
Memory Module(s)
Dell™ Inspiron™ 1440 Service Manual
Removing the Memory Module(s)
Replacing the Memory Module(s)
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
surface (such as a connector on the back of the computer).
CAUTION:
is not covered by your warranty.
CAUTION:
computer.
You can increase your computer memory by installing memory modules on the system board. See "Specifications" in your Setup Guide for information on the
memory supported by your computer.
NOTE:
Memory modules purchased from Dell™ are covered under your computer warranty.
Your computer has two user-accessible SODIMM sockets, DIMM A and DIMM B, accessed from the bottom of the computer.
Removing the Memory Module(s)
1. Follow the procedures in
2. Remove the battery (see
3. Remove the module cover (see
CAUTION:
4. Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.
5. Remove the memory module from the memory module connector.
1
memory module connector
3
memory module
Replacing the Memory Module(s)
CAUTION:
install a memory module in the connector labeled "DIMM B."
1. Align the notch in the memory module with the tab in the memory module connector.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To help prevent damage to the system board, remove the main battery (see
Before You
Begin.
Removing the
Battery).
Removing the Module
To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips.
2
securing clips (2)
If you need to install memory modules in two connectors, install a memory module in the connector labeled "DIMM A" before you
UserManuals.info
Removing the
Cover).
Battery) before working inside the