Dell Latitude 5300 설정 및 사양 - 페이지 19

{카테고리_이름} Dell Latitude 5300에 대한 설정 및 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Latitude 5300 49 페이지. 2-in-1 chrome
Dell Latitude 5300에 대해서도 마찬가지입니다: 설정 및 사양 매뉴얼 (44 페이지), 설정 및 사양 (34 페이지), 설정 및 사양 (22 페이지), 빠른 시작 매뉴얼 (15 페이지)

페이지 인쇄

CAUTION:

Unless you are an expert computer user, do not change the settings in the BIOS Setup program. Certain

changes can make your computer work incorrectly.

NOTE:

Depending on the computer and its installed devices, the items listed in this section may or may not be displayed.

NOTE:

Before you change BIOS Setup program, it is recommended that you write down the BIOS Setup program screen

information for future reference.

Use the BIOS Setup program for the following purposes:

•

Get information about the hardware installed in your computer, such as the amount of RAM and the size of the hard drive.

•

Change the system configuration information.

•

Set or change a user-selectable option, such as the user password, type of hard drive installed, and enabling or disabling base devices.

Topics:

•

Entering BIOS setup program

•

Navigation keys

•

Boot Sequence

•

One time boot menu

•

System setup options

Entering BIOS setup program

Turn on (or restart) your computer and press F2 immediately.

Navigation keys

NOTE:

For most of the System Setup options, changes that you make are recorded but do not take effect until you

restart the system.

Table 24. Navigation keys

Keys

Up arrow

Down arrow

Enter

Spacebar

Tab

Esc

Boot Sequence

Boot Sequence allows you to bypass the System Setup–defined boot device order and boot directly to a specific device (for example:

optical drive or hard drive). During the Power-on Self Test (POST), when the Dell logo appears, you can:

System setup

Navigation

Moves to the previous field.

Moves to the next field.

Selects a value in the selected field (if applicable) or follow the link

in the field.

Expands or collapses a drop-down list, if applicable.

Moves to the next focus area.

NOTE:

For the standard graphics browser only.

Moves to the previous page until you view the main screen.

Pressing Esc in the main screen displays a message that prompts

you to save any unsaved changes and restarts the system.

System setup