Allied Telesis AR400 Series 빠른 설치 매뉴얼 - 페이지 4
{카테고리_이름} Allied Telesis AR400 Series에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis AR400 Series 8 페이지. How to set up pppoe between a linux client and access concentrator
Allied Telesis AR400 Series에 대해서도 마찬가지입니다: 구성 방법 (6 페이지), 문제 해결 매뉴얼 (8 페이지), 문제 해결 (5 페이지), 빠른 설치 매뉴얼 (12 페이지), 안전 정보 매뉴얼 (18 페이지), 방법 (8 페이지)

4
Selecting a Site
The router should be installed on a level surface such as a desktop or bench.
When installing the router, choose a site that:
■
Allows adequate airflow around the router and its vents.
■
Is free of dust and moisture.
■
Will allow the router to operate within a temperature range of 0 to 40º C
(32 to 104º F) and a humidity range of 5 to 95% non-condensing.
■
Has a reliable and earthed (grounded), preferably dedicated and filtered
power supply circuit.
■
Does not expose cabling to sources of electrical noise, such as radios,
transmitters, broadband amplifiers, power lines, electric motors, and
fluorescent fixtures.
■
Allows easy access to the router's power and cable connections.
Installing the Router
This equipment must be earthed.
Follow these steps to install the router:
1.
Read the safety information.
For safety information, see the Safety and Statutory Information booklet. A
copy of this booklet is supplied with each router, and can also be found on
the Documentation and Tools CD-ROM or at www.alliedtelesyn.co.nz/
support/ar400.
2.
Gather additional items you will need.
If also installing an optional Port Interface Card (PIC), you will need a PIC
Quick Install guide.
3.
Unpack the router.
Verify the package contents. If any items are damaged or missing, contact
your sales representative.
4.
Place the router in its operating location.
See the previous Selecting a Site section for guidelines on choosing a
suitable location.
5.
Install expansion options.
If you purchased an optional PIC, install it now by following the PIC Quick
Install Guide. That guide can be found on the Documentation and Tools
CD-ROM or can be downloaded from www.alliedtelesyn.co.nz/support/
ar400/.
AR400 Series Router
C613-04032-01 REV C