ABB 1600481709A 빠른 시작 매뉴얼 - 페이지 9

{카테고리_이름} ABB 1600481709A에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB 1600481709A 13 페이지. Edge ac short circuit current limiter

QUICK START GUIDE

Step 1. Disassemble existing AC connections

Use "Turn off/Lock Out Tag Out".

Turn off AC power supplying the Edge cabinet.

2. Note which cord is "A" feed and which is "B" feed.

3. Unplug AC cords from the twist-n-lock input receptacles

at the top of the cabinet.

Note: This process is written for a system that is not

providing active load support or that can be

temporarily taken down. If this system is live and

cannot be taken down for the installation duration

period please contact Technical Support to discuss

alternatives.

Remove the 4 screws which attach the AC input

panel to top of the cabinet so that the panel can be

opened as shown.

2. Disconnect the black, blue and red wires from each

of the receptacles. Keep track of the wire which is

connected to "A" and "B" receptacles.

3. Remove the 4 screws on the back center panel and

then remove the panel.

Note: Both the AC input panel and the back center panel

will be discarded.

Page 9

Edge_Ilim_G391_QSG

Version. 2.0