Dell P63G 소유자 매뉴얼 - 페이지 39

{카테고리_이름} Dell P63G에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell P63G 47 페이지. Wyse mobile thin client
Dell P63G에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

If you experience a problem with your computer, run the ePSA diagnostics before contacting Dell for technical assistance. The purpose of

running diagnostics is to test your computer's hardware without requiring additional equipment or risking data loss. If you are unable to fix

the problem yourself, service and support personnel can use the diagnostics results to help you solve the problem.

Topics:

•

•

Device status lights

•

Battery status lights

Enhanced Pre-Boot System Assessment (ePSA)

diagnostics

The ePSA diagnostics (also known as system diagnostics) performs a complete check of your hardware. The ePSA is embedded with the

BIOS and is launched by the BIOS internally. The embedded system diagnostics provides a set of options for particular devices or device

groups allowing you to:

•

Run tests automatically or in an interactive mode

•

Repeat tests

•

Display or save test results

•

Run thorough tests to introduce additional test options to provide extra information about the failed device(s)

•

View status messages that inform you if tests are completed successfully

•

View error messages that inform you of problems encountered during testing

CAUTION:

Use the system diagnostics to test only your computer. Using this program with other computers may cause invalid

results or error messages.

NOTE:

Some tests for specific devices require user interaction. Always ensure that you are present at the computer terminal

when the diagnostic tests are performed.

Power-on the computer.

As the computer boots, press the F12 key as the Dell logo appears.

On the boot menu screen, select the Diagnostics option.

The Enhanced Pre-boot System Assessment window is displayed, listing all devices detected in the computer. The diagnostics starts

running the tests on all the detected devices.

To run a diagnostic test on a specific device, press Esc and click Yes to stop the diagnostic test.

Select the device from the left pane and click Run Tests.

If there are any issues, error codes are displayed.

Note the error code and contact Dell.

Diagnostics