Avtech AVX912R6 사용자 설명서 - 페이지 3

{카테고리_이름} Avtech AVX912R6에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avtech AVX912R6 4 페이지. Power over coaxial converter

SYSTEM CONCEPT

AVTECH has combined NVR, AVP IP cameras

to built video surveillance systems with one cable solution, which requires only one

cable to operate, and no need to plug in power.

AVX912R6 is using PoC technology to pass electricity, along with data on a coaxial

cable. Also, AVX912R6 enables you to connect multiple cameras to NVR at a time.

This simple solution helps you get into IP-based system easily, and especially it

requires no additional power and minimizes the clutter of extra cables.

The graph below shows how to connect a NVR, an AVX912R6 and AVP IP cameras

altogether.

Step 1: Plug a network cable into the LAN port of NVR and AVX912R6.

Note: The other LAN port on AVX912R6 is to connect AVX912R6 to another one to

expand the number of cameras in use.

Step 2: Plug the existing coaxial cables into PoC ports of AVX912R6 and coaxial port of AVP IP

cameras. (One camera requires one coaxial cable and up to 6 AVP IP cameras)

Step 3: Connect power adapters to NVR and AVX912R6.

Step 4: Turn on the NVR and AVX912R6.

* AVP IP camera is one type of IP cameras that offers data transmission over a coaxial cable via a BNC connector.

AVP IP camera should be paired with AVX912R6 for quick replacement from existing CCTV systems to HD IP

systems

, and AVX912R6, PoC converter together