Dell PP11L 서비스 매뉴얼 - 페이지 16

{카테고리_이름} Dell PP11L에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PP11L 48 페이지.

display panel

top cover

M2 x 3-mm screws (4)

8. Remove the display panel from the top cover.

9. Use the pull-tab to disconnect the bottom flex-cable connector from the inverter connector.

top flex-cable connector

top display-cable connector

pull-tab on bottom flex-cable connector

10. Press in both sides of the top display cable connector, and pull the display cable connector away from the top flex-cable connector.

Installing the Display Panel

1. Connect the top display cable connector to the top flex-cable connector.

2. Connect the bottom flex-cable connector to the inverter connector.

3. Replace the display panel inside the top cover.

4. Tighten the four M2 x 3-mm screws (two on each side) around the display panel.

5. Replace the display bezel (see

Display Latch

NOTICE:

Removing the Display Latch

1. Follow the instructions in "Preparing to Work Inside the Computer."

2. Remove the center control cover (see

3. Remove the keyboard (see

4. Remove the display assembly (see

5. Remove the display bezel (see

6. Remove the M2.5 x 5-mm screw that secures the display latch to the top cover.

Great user manuals database on

"Installing the Display

Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

"Removing the Center Control

"Removing the

Keyboard").

"Removing the Display

UserManuals.info

Bezel").

Cover").

Assembly").

Bezel").