Dell Precision 3430 설정 및 사양 - 페이지 22
{카테고리_이름} Dell Precision 3430에 대한 설정 및 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Precision 3430 36 페이지. Small form factor, cable cover
Dell Precision 3430에 대해서도 마찬가지입니다: 설치 매뉴얼 (7 페이지), 재이미징 매뉴얼 (16 페이지)
Option
UEFI Capsule Firmware Updates
TPM 2.0 Security
Computrace
Chassis Intrusion
OROM Keyboard Access
Admin Setup Lockout
Master Password Lockout
SMM Security Mitigation
22
System setup
Description
Allow Non-Admin Password Changes - This option is enabled by default.
This option controls whether this system allows BIOS updates via UEFI capsule update packages.
This option is selected by default. Disabling this option will block BIOS updates from services such as
Microsoft Windows Update and Linux Vendor Firmware Service (LVFS)
Allows you to control whether the Trusted Platform Module (TPM) is visible to the operating system.
•
TPM On (default)
•
Clear
•
PPI Bypass for Enable Commands
•
PPI Bypass for Disable Commands
•
PPI Bypass for Clear Commands
•
Attestation Enable (default)
•
Key Storage Enable (default)
•
SHA-256 (default)
Choose any one option:
•
Disabled
•
Enabled (default)
This field lets you Activate or Disable the BIOS module interface of the optional Computrace Service
from Absolute Software. Enables or disables the optional Computrace service designed for asset
management.
•
Deactivate
•
Disable
•
Activate - This option is selected by default.
This field controls the chassis intrusion feature.
Choose any one of the option:
•
Disabled (default)
•
Enabled
•
On-Silent
This option determines weather users are able to enter Option ROM Configuration screens via
hotkeys during boot.
•
Enabled (Default)
•
Disabled
•
One Time Enable
Allows you to prevent users from entering Setup when Admin password is set. This option is not set
by default.
Allows you to disable master password support Hard Disk passwords need to be cleared before the
settings can be changed. This option is not set by default.
Allows you to enable or disable additional UEFI SMM Security Mitigation protections. This option is
not set by default.