Dell Precision 5770 연결 매뉴얼 - 페이지 5

{카테고리_이름} Dell Precision 5770에 대한 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Precision 5770 13 페이지. External display
Dell Precision 5770에 대해서도 마찬가지입니다: 설정 및 사양 (25 페이지), 재이미징 매뉴얼 (16 페이지), 기술 매뉴얼북 (38 페이지), 설정 및 사양 (28 페이지), 설정 및 사양 (27 페이지)

페이지 인쇄
Dell Precision 5770 연결 매뉴얼

Enable Direct Graphics Controller Direct Output mode

You can connect four external displays or two 8K displays on computers with the NVIDIA RTX A3000 or NVIDIA RTX
A2000 discrete graphics card installed. To do so, you must enable Direct Graphics Controller Direct Output Mode in the
computer's BIOS. When enabled, the graphics signals are sent to the external display using the discrete graphics card instead of
integrated graphics. By default, this mode is disabled in the BIOS.
To change Direct Graphics Controller Direct Output Mode in the BIOS:
1. Restart your computer and press <F2> immediately to enter the BIOS.
2. In the BIOS screen, select Display.
3. Select Direct Graphics Controller Direct Output mode.
4. Select Enable.
5. Save changes and exit the BIOS.
For more information about accessing and configuring the BIOS, see the computer's Service Manual at www.dell.com/support.

Turn off the internal display

There may be instances where you may want to turn off the computer's internal display to connect more external displays.
You can turn off the display of your computer by using the Intel HD Graphics Command Center.
To turn off the display:
1. In the Windows search bar, type Intel Graphics Command Center and press <Enter>.
2. Accept the Intel Graphics Command Center software licence agreement.
3. On the Intel Graphics Command Center window, click Display. The list of active displays is listed under the Connected
Displays section.
4. Click the ellipsis (...) in the top-right corner of your primary display, then click Extend > Display 2.
5. Click the ellipsis (...) in the top-right corner of display 2, then click Make Display Primary.
6. Click the ellipsis (...) in the top-right corner of your computer's display, then click Disable.
Before you begin
5