Dell Precision 7540 설정 및 사양 매뉴얼 - 페이지 32
{카테고리_이름} Dell Precision 7540에 대한 설정 및 사양 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Precision 7540 43 페이지.
페이지 인쇄
Option
Block Sleep
Advanced Battery Charge
Configuration
Primary Battery Charge
Configuration
Post behavior
Table 32. POST Behavior
Option
Adapter Warnings
Numlock Enable
Fn Lock Options
Fastboot
Extended BIOS POST
Time
32
System setup
Description
•
Disabled—Default - Does not allow the system to power on by special LAN signals when it receives
a wake-up signal from the LAN or wireless LAN.
•
LAN Only - Allows the system to be powered on by special LAN signals.
•
WLAN Only - Allows the system to be powered on by special WLAN signals.
•
LAN or WLAN - Allows the system to be powered on by special LAN or WLAN signals.
Allows you to block entering to sleep in OS environment.
This option enables you to maximize the battery health. By enabling this option, your system uses the
standard charging algorithm and other techniques, during the non-work hours to improve the battery
health.
Allows you to select the charging mode for the battery.
The options are:
•
Adaptive—Default
•
Standard - Fully charges your battery at a standard rate.
•
ExpressCharge- The battery charges over a shorter period of time using Dell's fast charging
technology.
•
Primarily AC use
•
Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
NOTE:
All charging mode may not be available for all the batteries. To enable this option,
disable the Advanced Battery Charge Configuration option.
Description
Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power
adapters.
•
Enable Adapter Warnings—Default
Allows you to enable or disable the Numlock function when the system boots.
•
Enable Numlock—Default
Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their
standard and secondary functions. If you disable this option, you cannot toggle dynamically the primary
behavior of these keys.
•
Fn Lock—Default
Click one of the following options:
•
Lock Mode Disable/Standard
•
Lock Mode Enable/Secondary—Default
Allows you to speed up the boot process by bypassing some of the compatibility steps.
Click one of the following options:
•
Minimal
•
Thorough—Default
•
Auto
Allows you to create an additional preboot delay.
Click one of the following options: