ensol ES1V2.65 설치 지침 - 페이지 9

{카테고리_이름} ensol ES1V2.65에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. ensol ES1V2.65 20 페이지. Flat solar collectors

4.1.5 montage of the collector clampings

Collector clamping

4.2

Installation of the connection system - hydraulic connection of the collector

4.2.1. Hydraulic connection of the harp collectors ES1V/2.0 and ES1V/2.65

Directions!

Hydraulic conduits and fixtures can be connected at the left or right side of

the collector battery. The instruction presents the connection at the right side,

as an example.

One-sided connection of maximum 5 collectors.

When forming a battery you can connect maximum 5 collectors.

Installation instruction

of the flat solar collectors models ES1V2.0, ES1V2.65,

ES2V/2.0 AL, ES2V/2.65

integrated in the slate roof.

elbow

Expansion joint

Fix the left collector at the upper and lower

left side by the help of the collector clamping

(40 x 40mm) and wood screws (5 x 40mm).

Afterwards place the right collector. Set both

linear collector clamping bars (114 x 30mm)

between the collectors, push the collectors

together and screw the clamping bars down

by wood screws (5 x 40mm). Fix the right

collector also at the upper and lower side by

the help of collector clamping (40 x 40mm)

and wood screws (5 x 40mm).

cross-fitting