ensol ES2V/2.0 AL 설치 지침 - 페이지 17

{카테고리_이름} ensol ES2V/2.0 AL에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. ensol ES2V/2.0 AL 20 페이지. Flat solar collectors

4.4.8 Fixng the wind protection rail

Wood screw 5 x 110mm

4.4.9 montage of the slate roofing

Installation instruction

of the flat solar collectors models ES1V2.0, ES1V2.65,

ES2V/2.0 AL, ES2V/2.65

integrated in the slate roof.

Mount the wood wedge at the battens and fix

them with three wood screws (5 x 110 mm).

The wood wedge has to be in touch with the

side flashings on both outer sides.

Attention: The wood wedge has to lie on two

battens!

Now start with the slates. Alternately use slates and

connection plates (double-lap slating). Insert the

short side of each connection plate into the side

flashing.

Do the same on the right side!