Dell Precision M60 Series 서비스 매뉴얼 - 페이지 9
{카테고리_이름} Dell Precision M60 Series에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Precision M60 Series 44 페이지.
Dell Precision M60 Series에 대해서도 마찬가지입니다: 서비스 매뉴얼 (44 페이지)
페이지 인쇄
Back to Contents Page
Microprocessor Module
Dell Precision™ M60 Service Manual
Removing the Microprocessor Module
CAUTION:
NOTICE:
as the back panel) on the computer.
NOTICE:
screw to prevent intermittent contact between the cam screw and microprocessor.
NOTICE:
1. Follow the instructions in
2. Remove the keyboard.
3. Remove the fan.
NOTICE:
oils in your skin reduce the heat transfer capability of the thermal pads.
4. Remove the
NOTICE:
5. To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.
1 screwdriver (perpendicular
to microprocessor)
2 ZIF-socket cam screw
3 ZIF socket
4 pin-1 corner
NOTE:
The ZIF-socket cam screw secures the microprocessor to the system board. Take note of the arrow on the ZIF-socket cam screw, which indicates
the direction to turn the cam screw.
6. Lift out the microprocessor module.
Installing the Microprocessor Module
Great user manuals database on
Before performing the following procedures, read the safety instructions in your System Information Guide.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
Do not touch the processor die. Press and hold the microprocessor down on the substrate on which the die is mounted while turning the cam
To avoid damage to the microprocessor, hold the screwdriver so that it is perpendicular to the microprocessor when turning the cam screw.
"Preparing to Work Inside the
To ensure maximum cooling for the microprocessor, do not touch the heat transfer areas on the microprocessor thermal-cooling assembly. The
microprocessor thermal-cooling
assembly.
When removing the microprocessor module, pull the module straight up. Be careful not to bend the pins on the microprocessor module.
UserManuals.info
Computer."