Dell Studio 1457 서비스 매뉴얼 - 페이지 14
{카테고리_이름} Dell Studio 1457에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Studio 1457 48 페이지.
Dell Studio 1457에 대해서도 마찬가지입니다: 서비스 매뉴얼 (48 페이지)
페이지 인쇄Back to Contents Page
Base Cover
Removing the Base Cover
Replacing the Base Cover
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
is not covered by your warranty.
CAUTION:
computer.
Removing the Base Cover
1. Follow the instructions in
2. Remove the battery (see
3. Turn the computer over and loosen the six captive screws on the base cover.
4. Lift the base cover off the computer.
1
captive screws (6)
3
base cover tabs (5)
Replacing the Base Cover
1. Follow the instructions in
CAUTION:
2. Align the base cover tabs to the base.
3. Slide the base cover tabs under the base.
4. Tighten the six captive screws that secure the base cover to the computer.
5. Replace the battery (see
6. Turn on the computer.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To help prevent damage to the system board, remove the main battery (see
Before You
Begin.
Removing the
Battery).
2
base cover
Before You
Begin.
If the base cover is difficult to close, remove the cover and replace it. Forcing the cover to close may damage your computer.
Replacing the
Battery) or connect the AC adapter to your computer and an electrical outlet.
UserManuals.info
Removing the
Battery) before working inside the