Dell Studio 1458 서비스 매뉴얼 - 페이지 26
{카테고리_이름} Dell Studio 1458에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Studio 1458 48 페이지.
Dell Studio 1458에 대해서도 마찬가지입니다: 서비스 매뉴얼 (48 페이지)
6. Tilt the hard drive by 45-degrees and lift it out of the computer base.
1
hard drive
7. Remove the four screws that secure the hard drive to the hard drive bracket.
8. Lift the hard drive off the hard drive bracket.
1
hard drive
3
screws (4)
CAUTION:
When the hard drive is not in the computer, store it in protective antistatic packaging (see "Protecting Against Electrostatic Discharge"
in the safety instructions that shipped with your computer).
Replacing the Hard Drive
1. Follow the procedures in
Before You
2. Remove the new drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
3. Place the hard drive in the hard drive bracket.
4. Replace the four screws that secure the hard drive bracket to the hard drive.
5. Slide the hard drive into the computer base.
6. Slide the hard drive towards the connector using the pull-tab.
7. Replace the two screws that secure the hard drive to the computer base.
2
hard drive bracket
Begin.