Dell Studio 1537 서비스 매뉴얼 - 페이지 13

{카테고리_이름} Dell Studio 1537에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Studio 1537 42 페이지.

NOTE:

The pin-1 corner of the processor module has a triangle that aligns with the triangle on the pin-1 corner of the ZIF socket.

When the processor module is properly seated, all four corners are aligned at the same height. If one or more corners of the module are higher than the

others, the module is not seated properly.

1 ZIF-socket cam screw 2 ZIF socket

3 pin-1 corner

NOTICE:

To avoid damage to the processor, hold the screwdriver so that it is perpendicular to the processor when turning the cam screw.

3. Tighten the ZIF socket by turning the cam screw clockwise to secure the processor module to the system board.

4. Replace the processor thermal-cooling assembly (see

5. Replace the base cover (see

Back to Contents Page

Replacing the Processor Thermal-Cooling

Replacing the Base

Cover).

Assembly).