Dell Studio 1537 서비스 매뉴얼 - 페이지 38

{카테고리_이름} Dell Studio 1537에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Studio 1537 42 페이지.

1 screws (8)

2 fingerprint reader connector

3 touch pad connector 4 speaker connector

9. Moving from left to right, carefully lift the palm rest along the rear edge, near the hinge brackets, then gently lift the palm rest to remove it from the

computer.

Replacing the Palm Rest

CAUTION:

Before you begin the following procedure, follow the safety instructions that shipped with your computer.

1. Align the palm rest with the base of the computer and gently snap it into place.

2. Connect the touch pad, fingerprint reader, and speaker connectors to the system board.

3. Replace the eight screws on the palm rest.

4. Replace the display assembly (see

5. Replace the mini cards (see

6. Replace the eight screws at the bottom of the computer.

7. Replace the base cover (see

Back to Contents Page

Replacing the Display

Assembly).

Replacing the

Mini-Card).

Replacing the Base

Cover).