Dell Studio 1569 서비스 매뉴얼 - 페이지 35

{카테고리_이름} Dell Studio 1569에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Studio 1569 48 페이지.

Back to Contents Page

Palm Rest

Dell™ Studio™ 1569 Service Manual

Removing the Palm Rest

Replacing the Palm Rest

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the

Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To help prevent damage to the system board, remove the main battery (see

computer.

Removing the Palm Rest

1. Follow the procedures in

Before You

2. Remove the battery (see

Removing the

3. Remove the power button panel (see

4. Remove the keyboard (see

5. Close the computer and turn it over.

6. Remove the seven screws that secure the palm rest to the computer base.

7. Turn the computer over and open the display as far as possible.

8. Lift the connector latch, then pull the pull-tab and disconnect the touch pad cable from the system board connector.

9. Remove the six screws that secure the palm rest to the computer base.

10. Make a note of the speaker cable routing and carefully dislodge the cable from the routing guides on the palm rest.

Begin.

Battery).

Removing the Power Button

Removing the

Keyboard).

Removing the

Panel).

Battery) before working inside the