Dell Vostro 1450 서비스 매뉴얼 - 페이지 17

{카테고리_이름} Dell Vostro 1450에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Vostro 1450 48 페이지. Document
Dell Vostro 1450에 대해서도 마찬가지입니다: 설정 및 기능 정보 (9 페이지), 서비스 매뉴얼 (48 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄
Dell Vostro 1450 서비스 매뉴얼
 
CAUTION:
does not require force.
 
CAUTION:
 
1. Follow the instructions in
 
2. Align the pin-1 corner of the processor so that it points to the triangle on the ZIF socket, and insert the processor into the ZIF socket.
When the processor is correctly seated, all four corners are aligned at the same height. If one or more corners of the processor are higher than the
others, the processor is not seated correctly.
 
CAUTION:
to apply slight pressure to the center of the processor while turning the cam screw.
 
3. Tighten the ZIF socket by turning the cam screw clockwise to secure the processor to the system board.
 
4. Peel the backing off the thermal cooling pad and adhere the pad to the portion of the processor heat sink that covers the processor.
 
5. Replace the processor heat sink assembly (see
 
6. Replace the system board (see
 
7. Update the BIOS using a flash BIOS-update program CD (see
Back to Contents Page
 
Great user manuals database on
Ensure that the cam lock is in the fully open position before seating the processor. Seating the processor properly in the ZIF socket
A processor that is not properly seated can result in an intermittent connection or permanent damage to the processor and ZIF socket.
Before You
Begin.
To prevent intermittent contact between the ZIF-socket cam screw and the processor when removing or replacing the processor, press
Replacing the Processor Heat Sink
Replacing the System
UserManuals.info
Assembly).
Board).
Flashing the
BIOS).