Dell Vostro 3460 소유자 매뉴얼 - 페이지 34

{카테고리_이름} Dell Vostro 3460에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Vostro 3460 47 페이지. Document
Dell Vostro 3460에 대해서도 마찬가지입니다: 설정 및 기능 정보 (8 페이지), 소유자 매뉴얼 (47 페이지), 설정 및 사양 (23 페이지)

페이지 인쇄
Dell Vostro 3460 소유자 매뉴얼
Option
Description
Default setting: The option is disabled.
Wireless Radio
Allows you to enable or disable the feature that automatically switches from wired or wireless networks without
Control
depending on the physical connection.
•
Default setting: The option is disabled.
Wake on LAN/
Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
WLAN
LAN signal.
•
•
•
•
Default setting: Disabled
Block Sleep
This option lets you block entering to sleep (S3 state) in operating system environment.
Block Sleep (S3 state)
Default setting: This option is disabled
Advanced Battery
This option enables you to maximize the battery health. By enabling this option, your system uses the standard
Charge
charging algorithm and other techniques, during the non-work hours to improve the battery health.
Configuration
Disabled
Default setting: Disabled
Primary Battery
Allows you to select the charging mode for the battery. The options are:
Charge
•
Configuration
•
•
•
•
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.

POST Behavior screen options

Option
Description
Adapter Warnings
Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power adapters.
Default setting: Enable Adapter Warnings
Fn Key Emulation
Allows you to set the option where the Scroll Lock key is used to simulate the Fn key feature.
34
System Setup
Control WLAN Radio
Disabled
LAN Only
WLAN Only
LAN or WLAN
Adaptive
Standard — Fully charges your battery at a standard rate.
ExpressCharge — The battery charges over a shorter period of time using Dell's fast charging technology. This
option is enabled by default.
Primarily AC use
Custom
NOTE:
All charging mode may not be available for all the batteries. To enable this option, disable the
Advanced Battery Charge Configuration option.