Dell Vostro 5480 소유자 매뉴얼 - 페이지 32

{카테고리_이름} Dell Vostro 5480에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Vostro 5480 40 페이지.
Dell Vostro 5480에 대해서도 마찬가지입니다: 소유자 매뉴얼 (45 페이지), 빠른 시작 매뉴얼 (10 페이지), 설정 및 사양 (31 페이지), 외부 디스플레이 연결 매뉴얼 (8 페이지)

페이지 인쇄
Dell Vostro 5480 소유자 매뉴얼
Table 1. Main
System Time
System Date
BIOS Version
Product Name
Service Tag
Asset Tag
CPU Type
CPU Speed
CPU ID
L1 Cache
L2 Cache
L3 Cache
Fixed HDD
System Memory
Extended Memory
Memory Speed
Advanced
Table 2. Advanced
Intel SpeedStep
Virtualization
Integrated NIC
USB Emulation
USB PowerShare
USB Wake Support
SATA Operation
Adapter Warnings
Function Key Behavior
Battery Health
Miscellaneous Devices
Security
32
System Setup
Re-sets the time on the computer's internal clock.
Re-sets the date on the computer's internal calendar.
Displays the BIOS revision.
Displays the product name and the model number.
Displays the service tag of your computer.
Displays the asset tag of your computer (if available).
Displays the type of processor.
Displays the speed of the processor.
Displays the processor ID.
Displays the processor L1 cache size.
Displays the processor L2 cache size.
Displays the processor L3 cache size.
Displays the model number and capacity of the hard drive.
Displays the memory in-built on the computer.
Displays the memory installed on the computer.
Displays the memory speed.
Enable or disable the Intel SpeedStep
feature.
Enable or disable the Intel Virtualization
feature.
Enable or disable the power supply to the
on–board network card.
Enable or disable the USB emulation
feature.
Enable or disable the USB PowerShare
feature.
Enable or disable the USB wake support
feature
Change the SATA controller mode to
either ATA or AHCI.
Enable or disable the Adapter Warnings.
Specifies the behavior of the function key
<Fn>.
Displays a message about the battery
health.
These fields let you enable or disable
various on-board devices.
Default: Enabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: Disabled
Default: AHCI
Default: Enable
Default: Function key