Dell Vostro 7500 설정 및 사양 매뉴얼 - 페이지 27
{카테고리_이름} Dell Vostro 7500에 대한 설정 및 사양 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Vostro 7500 42 페이지.
페이지 인쇄
Connection options
Table 30. Connection
Option
Wireless Device Enable
Enable UEFI Network Stack
Power management
Table 31. Power Management
Option
Battery Configuration
Advanced Configuration
Peak Shift
Thermal Management
Description
Allows the system to run on battery during peak power usage hours.
The options are:
•
Adaptive—enabled by default
•
Standard
•
ExpressCharge
•
Primarily AC Use
•
Custom
NOTE:
If Custom Charge is selected, you can also configure Custom Charge Start and
Custom Charge Stop.
This option enables you to maximize the battery health.
By default, the Enable Advanced Battery Charge Mode option is disabled.
NOTE:
The user can charge battery using feature Beginning of Day and Work Period.
By default, Work Period is disabled.
Use ExpressCharge for accelerated battery charging.
Allows the system to run on battery during peak power usage hours.
Peak Shift - By default, this option is disabled.
NOTE:
The user can:
•
Set Battery Threshold Min = 15, Max = 100
•
Prevent AC power between certain times of the day using Peak Shift Start, Peak Shift
End, and Peak Shift Charge Start.
Allows cooling of fans and the processor heat management to adjust system performance, noise, and
temperature.
The options are:
•
Optimized—enabled by default
Description
Allows you to enable or disable the internal wireless devices.
The options are:
•
WLAN
•
Bluetooth
Both the options are enabled by default.
This controls the on-board LAN controller. It allows pre-OS and
early operating system networking features to use any enabled
NICs when UEFI networking protocols are installed and available,
and can be used without the PXE being turned on.
Enable UEFI Network Stack - This option is disabled by default.
System setup
27